Artesia, CA Appliance Air Conditioning Heating Repair and Service
Artesia, CA Appliance, Air Conditioning and Heating Repair
Los Angeles Artesia, CA Appliance Repair
HOME BRANDS WE REPAIR WARRANTY PRICES AREAS WE SERVICE TESTIMONIALS CONTACT US
 
Artesia, CA Appliance Repair > Artesia, CA Dryer Repair

We repair all brands/models Dryers in Artesia, CA such as Kenmore Dryers, Whirlpool Dryers, GE Dryers, Admiral Dryers, Amana Dryers and many more. (view the complete brands list we work on). We are open 24 hours a day, 7 days a week for Artesia, CA dryer repairs and there is no extra charge for the weekend or night dryer repair appointments. Our service call is Free with the dryer repair and all the work is guaranteed for 1 year.

800 207-3204

We provide dryer repair to all Artesia, CA zip codes and surrounding cities. The following areas correspond to our Appliance service areas:

Los Angeles
Long Beach
Glendale
Santa Clarita
Beverly Hills
Temple City
Calabasas
South Pasadena
Hollywood
Torrance
San Fernando
San Gabriel
West Hollywood

El Monte
Hawthorne
Inglewood
Downey
West Covina
Lakewood
Sun Valley
Burbank
Agoura Hills
Carson
Hermosa Beach
Inglewood
Lancaster

Malibu
Manhattan Beach
Playa Del Rey
Redondo Beach
Westlake Village
Carson
Monterey Park
El Segundo
Santa Monica
South Pasadena
West Covina
Pasadena
Palmdale

View the list of our service areas.

We repair all brands major dryers

Maytag
Whirlpool
GE
Thermador
Wedgewood
LG
Jenn-Air
Sub-Zero

Sears
Frigidaire
Speed Queen
Bosch
Fisher & Paykel
Hotpoint
Kenmore
Ruud

O'Keefe and Merritt
Sunray
Admiral
Samsung
Frigidare
Miele
Magic Chef
Tappan

And many more dryers that we repair in Artesia, CA brands view the full list

We have been in Artesia, CA Appliance Repair business for eight years. Take a look at what some of our previous clients
have had to say about us. For immediate Artesia, CA Dryer repair service call us 24/7 out our toll free number:

800 207-3204

You can also can contact us by the for your Artesia, CA dryer repair appointment. Just send us your name, a brief description of the Dryer problem and your contact information.

Please read these preventative and easy-to-repair tips. However if your Dryer problem cannot be resolved with our easy tips, consider calling us for an appointment. We will be happy to help.

Electric Dryers:

The dryer tumbles OK, but there is no heat.
Failure of electric element on dryers is quite often caused by the consumer either not having the proper kind of dryer venting, or not supplying the dryer with sufficient power. Both are equally deadly to the dryer.
First thing, check the circuit box to see if you're lucky. If the 220 circuit breaker key has popped, push it in again and see if the dryer operates.
If your home has an old fuse box, you may have two 110 volt fuses supplying the 220 volts needed to run the dryer. If one of them blows and the dryer is still getting 110 volts of electricity, the dryer motor will still work and rotate the dryer drum, but the heating element will be starved.
1. Disconnect the dryer from the electrical power
2. Remove the dryer rear service panel.
3. Remove the dryer belt from the idler pulleys.
4. Disconnect the wires from the motor switch.
5. Remove the two (2) screws mounting the dryer motor.
6. Remove the dryer motor.
7. Reverse the above procedure to reassemble the dryer belt
pulley assembly. The idler arm can be removed without removing the motor from the diver. The idler arm pivots on a stud mounted on the motor support.

To remove the idler assembly use fire following procedure:
1. Disconnect the dryer from the electrical power
2. Remove the dryer rear service panel.
3. Remove the belt from the dryer motor and idler pulleys.
4. Lift the idler arm off the stud.
5. Install the new dryer idler arm.
6. Reverse the above procedure to reassemble the

Dryer Electrical Requirements
The following are the electrical requirements for gas dryer:
1. Separate, properly polarized, grounded three-wire circuit
2. 120-volt, 60-hertz, ac power supply.
3. Amp maximum, delayed-action fuse or circuit breaker.
4. Outlet with accessibility to the dryer service cord plug when the dryer is installed.
The dryer must be grounded. In the event of a malfunction or dryer breakdown, grounding will reduce the risk of electrical shock by providing it path of least resistance for electrical current.
If the dryer is equipped with a service cord that has an equipment-grounding conductor and a grounding plug, the dryer plug must be plugged into an appropriate outlet that is properly installed and grounded and in accordance with all local codes and ordinances.

Dryer Exhaust System Requirements
Warning: If the dryer is not exhausted outdoors some fine lint will be expelled into the laundry area. Excessive lint can build up inside the ductwork, creating a fire hazard and restricting the air flow. A restricted air flow will increase the drying time. If the dryer present vent system is made up of plastic duct, replace it with a rigid or flexible metal duct. Make sure that the present duct is free of any lint prior to installing the dryer. Use a 4-inch-diameter (minimum) rigid or flexible metal duct only. A 4-inch wall cap is recommended.
Warning: Do not install the ductwork near combustible materials. The dryer must not be exhausted into a chimney, a wall, a ceiling, or any concealed space of the building where lint can accumulate, resulting a fire hazard.
Warning: Do not exceed the length of dryer duct pipe

If you need professional assistance for your Artesia, CA Dryer repair needs, call us 24/7:

800 207-3204

Or send an appointment request online at To do so, please specify your name, address and a brief nature of the Dryer problem. Once we receive your request we will contact you as soon as possible.