Artesia, CA Appliance Air Conditioning Heating Repair and Service
Artesia, CA Appliance, Air Conditioning and Heating Repair
Los Angeles Artesia, CA Appliance Repair
HOME BRANDS WE REPAIR WARRANTY PRICES AREAS WE SERVICE TESTIMONIALS CONTACT US
Home > AIR CONDITIONING HEATING AND Appliance REPAR

If you need Artesia, CA repair on your heating systems, we can come to your home any time that it is convenient for you. Call us 24/7 at our toll free number:

800 207-3204

Or send an appointment request online at To do so, please specify your name, address and a brief nature of the problem. Once we receive your request we will contact you as soon as possible.

Los Angeles
Long Beach
Glendale
Santa Clarita
Beverly Hills
Temple City
Calabasas
South Pasadena
Hollywood
Torrance
San Fernando
San Gabriel
West Hollywood

El Monte
Hawthorne
Inglewood
Downey
West Covina
Lakewood
Sun Valley
Burbank
Agoura Hills
Carson
Hermosa Beach
Inglewood
Lancaster

Malibu
Manhattan Beach
Playa Del Rey
Redondo Beach
Westlake Village
Carson
Monterey Park
El Segundo
Santa Monica
South Pasadena
West Covina
Pasadena
Palmdale

The products we fix in Artesia, CA include: heating repair, replacement, installation. We service all Artesia, CA County -- check the list of areas we service.

We work on the following brands: Ducane heating sustems, Trane heating sustems, American Standard heating sustems, Goodman heating sustems, Carrier heating sustems, Bryant heating sustems, Payne heating sustems, GE heating sustems, Janitrol heating sustems, Aprilaire heating sustems, Fedders heating sustems, Lennox heating sustems, Luxaire heating sustems, Comfortmaker heating sustems, Tempstar heating sustems, Amana heating sustems, York heating sustems, Rheem heating sustems, Ruud heating sustems, Armstrong heating sustems, Heil heating sustems, and many other brands of heating systems.

Below we have provided preventative and easy-to-repair tips for your heating systems. If your issue cannot be resolved with our easy tips, we strongly suggest that you call us for an appointment. We will be happy to help.

Heating Efficiency

With oil systems, the heating repair service technician can install a smaller nozzle, which costs just a few dollars and can cut fuel bills by 5-10%. Nozzles are sized according to fuel flow rates, the specification plate on your heating burner should include an acceptable flow range, and an average range would be from 0.50 to 1.25 gallons per hour (GPH). Nozzle size should not be reduced more than 25-30% below the lowest firing range on the specific catenulate.
With gas heating systems, reducing the nozzle (or orifice) size is tricky; costs and savings will vary widely depending on the heating system. On a furnace he ating that is highly oversized, both the nozzle orifice and the baffles could be changed at a cost of $60-80, with possible savings of 10-15%. The orifice size should not be reduced more than 30%. Consult a gas heating repair service technician to find out if size reduction is possible for your system. Boilers for steam systems should not be downsized.

Draft reduction (oil only)

The draft test will determine whether excess heat is being lost up the chimney. This problem is particularly common in heating systems that were converted from coal to oil. If the draft is too high, your heating repair service technician should install a barometric damper in the flue pipe. This will cost from $20-80 and can reduce fuel use by 5% or more. If a barometric damper is already there, it may simply need adjustment.

New oil burner installation

If you have an old, inefficient oil burner but are not ready to replace the whole thing, have a flame-retention burner installed. It will mix oil and air more thoroughly, operate with less air flow, and send less heat up the chimney. In addition, a flame-retention burner will block air flow through the burner when the heating system is not running, reducing heat loss up the chimney. Flame-retention burners cost $400-500, depending on whether a new combustion chamber and controls are needed. A properly sized flame-retention burner with reduced nozzle size should save 10-20%. You'll do even better, though, replacing the whole heating furnace or boiler with a state-of-the-art high-efficiency model. Modulating aqua stats (hot-water boilers only). An aquastat regulates boiler temperatures, keeping the water within a prescribed temperature range, usually around 180F. Unfortunately, it will keep the water just as hot even when there is little need for heat, such as during spring and fall months. A modulating aquastat (or outdoor reset) senses outdoor temperature and keeps the boiler water only as hot as needed. Brand-name aqua stats such as Enertrol or Mastermind sell for $150-350 and reduce fuel consumption by 5-10%.

If your issue cannot be resolved with our easy tips, we strongly suggest that you call us for an appointment.

800 207-3204

Or send an appointment request online at To do so, please specify your name, address and a brief nature of the problem. Once we receive your request we will contact you as soon as possible. We will be happy to help.